ROCK DRILLING IS TOUGH WORK, BUT WE ALWAYS TRY TO MAKE IT AS EASY AS POSSIBLE FOR YOU

The medium-weight BBD15E has a combined ”T/D handle” that make it easy for you to carry. It offers a high power-to weight ratio and a high operational safety. The E means it’s equipped with spring-dampened handles and a highly effective silencer. The largest BBD drill is available in a version with a trigger valve, BBD 15ET. If you have an older machine it’s possible to retrofit it with a trigger conversion kit.

The Atlas Copco DCP10 Pneumatic Dust Collector can keep your construction site dust free.

Remove dust directly at the source and keep silica dust levels below the permissible exposure limit.

Just hook up your air connection from your one of your compressors and you’re good to go.

Benefits of the DCP 10 Pneumatic Dust Collector

• Simple to set up and operate

• 99.5% Clean air

• 88DB(A) low noise operation

• Foldable tripod design

• Last for 8 hour shift

• Safe disposal of dust

• Recyclable collection bags 

Twin tool conversion Kit

If you want to work in the most efficient way possible? Use two breakers, or one breaker and a rock drill at the same time.

The Panther Pneumatic Rock Drills are intended for use for hole diameter range of 27 to 41 mm (1-1 5/8 in) with Hex 22 (7/8”) rotation shank as a standard. When used with Atlas Copco tapered button bits, penetration rate will improve some 25-50 percent compared to conventional integral steels. And they have three to five times longer service life.

The DKR 36 is tiny, but it handles anything from cracking rocks to chipping brickwork. The quick-release chuck is a money saver. It helps you change between drilling and chipping operations and you can do more work in shorter time. Lubrication is especially important to think about when you are drilling. A built-in lubricator lasts a whole normal shift and helps keep the drill chipper and tools in shape. There is almost always a use for it, and the weight helps you work in almost impossible positions. You can go overhead or under water. Divers especially like this model because they can do so much with it – anything from underwater drilling to chipping – thanks to low feed force.

The Atlas Copco BBD 15ET pneumatic rock drills are light and easy to handle, great for those quick jobs and working in difficult-to-get-to areas. Equipped with a D-type handle, The Atlas Copco BBD 15ET pneumatic rock drill is best used for horizontal drilling, plug hole drilling, and drilling in concrete to a maximum depth of one meter.

We stock an array of Atlas Copco Heavy Surface Rock Drills that are ideally suitable for quarrying, production drilling and mining. The SRD 20 is perfect for…

• Drills up to 6 m depth

• Production drilling in quarry/dimension stone industry

• Blast hole and secondary drilling

Pneumatic rock drill for construction, road works and quarrying We know the drill when it comes to reliable and comfortable handheld tools. Our range of surface rock drills is ready to tackle any job: horizontal or vertical, light or heavy.

Our light surface rock drills are perfect for:

• Horizontal drilling

• Plug hole drilling

• Drilling in concrete

A solid body concept from a single cast reduces the need for bolts that might break. The anvil block has been refined to handle and deliver impact energy. But heavy tools and massive power means a lot of responsibility on our behalf. We are specially proud of HAPS (Hand Arm Protection System) that reduce vibration levels and allow up to seven times as much trigger time compared to a conventional breaker. Together with the slim polyurethane silencer that reduces noise by 75 percent.

UNDERGROUND UNIT APPROVED.

The RRD57 Chipping Hammer is light, quiet and has a long service life making it ideal for all material removal tasks in foundries, engineering workshops, shipyards and in the construction industry. The tool comes with a light alloy casing, is vibration damped with very low vibration values as a result and piped away exhaust. Its built-in ergonomic features reduce the load on the user and help to protect the operator against ill effects of long-term vibration exposure.

Power where you need it

A hammer is power and mobility in unison. With the right hammer you can put the power where it’s needed most. The smallest models, such as TEX 03 PS and TEX 05 P, are light enough even for overhead work and help you get in close behind pillars and under stairs when doing renovation work.

The smallest models, such as TEX 05 P, are light enough even for overhead work and help you get in close behind pillars and under stairs when doing renovation work.

Thanks to Sofstart you keep the chisel point where you want it. The two-step trigger helps out with first critical cuts. The air cushion system has basically removed metal-tometal contacts. The piston only turns on air cushions at both ends of the cylinder.Weighing below 6 kg, this model is light enough for overhead work. A screw cap retainer provides comfortable grip.

Larger models such as the TEX 09 PS, 10 PS and 12 PS are the Swiss army knifes of pneumatic hammers, designed to handle everything from soft/medium materials like brick to tough concrete.

Thanks to Sofstart you keep the chisel point where you want it. The two-step trigger helps out with first critical cuts. The air cushion system has basically removed metal-tometal contacts. The piston only turns on air cushions at both ends of the cylinder.The effective silencer makes work easier. All our products meet the European noise emission directive.

Larger models such as the TEX 12 PS are the Swiss army knifes of pneumatic hammers, designed to handle everything from soft/medium materials like brick to tough concrete. Thanks to Sofstart you keep the chisel point where you want it. The two-step trigger helps out with first critical cuts. The air cushion system has basically removed metal-tometal contacts. The piston only turns on air cushions at both ends of the cylinder. The effective silencer makes work easier. All our products meet the European noise emission directive.

Our medium breaker can handle most tasks. And just like you, they’re unique. The Solid body design means the whole breaker is made from one single casting. Thanks to the technology, we can skip the bolts that are often used to keep the machine together. In fact, our breakers have between 25 and 35 less parts than other breakers. Fewer parts make simple servicing and better reliability. For you that translate to a little more done every day and a lot of time saved each month.